a
-
- Tippler
- Posts: 20
- Joined: Mon Jan 20, 2020 9:25 pm
-
- Lost in an Alcoholic Haze
- Posts: 677
- Joined: Tue May 05, 2015 11:21 am
Re: home made pressure fermentor for a trial run
Yup, going with kegs is the way to go, but research your spunding valve well. They are not all made equally.
I see a lot of positive comments on the “blow tie”
I see a lot of positive comments on the “blow tie”
- Kev888
- So far gone I'm on the way back again!
- Posts: 7701
- Joined: Fri Mar 19, 2010 6:22 pm
- Location: Derbyshire, UK
Re: home made pressure fermentor for a trial run
Some of the plastic PBs do run to 10psi yes - though not all and occasionally there are manufacturing defects so I would check the spec and also test with water first. But in general it sounds do-able. Plastic PET bottles might also offer a way to test the idea on a small scale, not sure what pressure they go to but are obviously okay for carbonated beer.
As mentioned the spunding valve needs to be decent; some are imprecise and/or leaky and you don't have much headroom to play with. Diaphragm types are generally better, I believe the 'blow tie' is such.
As mentioned the spunding valve needs to be decent; some are imprecise and/or leaky and you don't have much headroom to play with. Diaphragm types are generally better, I believe the 'blow tie' is such.
Kev
-
- Lost in an Alcoholic Haze
- Posts: 677
- Joined: Tue May 05, 2015 11:21 am
Re: home made pressure fermentor for a trial run
PET bottles are rated to scary levels. I routinely put 45 PSI into them as a portable gas source for growler kegs.
Some sources say they can take 150 PSI, but someone else can do those experiments on their own youtube channel and I will get popcorn.
Oh and if we are talking about practical uses for PET bottles:
A PET bottle Tee: https://m.aliexpress.com/item/400044331 ... d354d62de6
for attaching 2 carbonation caps and converting into a portable growler that can be filled/ dispensed like a regular keg.
Lets not forget the keg king junior, specifically designed for fermenting under pressure:
https://www.keg-king.com.au/fermenter-k ... oVl1z-PLBc ( I think there is a european site for these)
Some sources say they can take 150 PSI, but someone else can do those experiments on their own youtube channel and I will get popcorn.
Oh and if we are talking about practical uses for PET bottles:
A PET bottle Tee: https://m.aliexpress.com/item/400044331 ... d354d62de6
for attaching 2 carbonation caps and converting into a portable growler that can be filled/ dispensed like a regular keg.
Lets not forget the keg king junior, specifically designed for fermenting under pressure:
https://www.keg-king.com.au/fermenter-k ... oVl1z-PLBc ( I think there is a european site for these)
- Kev888
- So far gone I'm on the way back again!
- Posts: 7701
- Joined: Fri Mar 19, 2010 6:22 pm
- Location: Derbyshire, UK
Re: home made pressure fermentor for a trial run
I'd not realised it was quite that high. Excellent. I believe as well as the T-piece there were some bigger than normal PET bottles being proposed to go with them. Can't recall if the bottles are out yet or not though, probably not it was just a possibility, I think.
Kev
Re: home made pressure fermentor for a trial run
Apparently they are about to start working on them.Kev888 wrote:I'd not realised it was quite that high. Excellent. I believe as well as the T-piece there were some bigger than normal PET bottles being proposed to go with them. Can't recall if the bottles are out yet or not though, probably not it was just a possibility, I think.
- Kev888
- So far gone I'm on the way back again!
- Posts: 7701
- Joined: Fri Mar 19, 2010 6:22 pm
- Location: Derbyshire, UK
Re: home made pressure fermentor for a trial run
Thats encouraging
I'm sure I heard about them from you originally, too. Thanks
I'm sure I heard about them from you originally, too. Thanks
Kev
Re: home made pressure fermentor for a trial run
So does the PET bottle growler with the double carbonation cap need some sort of diptube? Can you attach hosing to the inside some how? Looks interestingTheSumOfAllBeers wrote: ↑Fri Jan 24, 2020 5:10 pmPET bottles are rated to scary levels. I routinely put 45 PSI into them as a portable gas source for growler kegs.
Some sources say they can take 150 PSI, but someone else can do those experiments on their own youtube channel and I will get popcorn.
Oh and if we are talking about practical uses for PET bottles:
A PET bottle Tee: https://m.aliexpress.com/item/400044331 ... d354d62de6
for attaching 2 carbonation caps and converting into a portable growler that can be filled/ dispensed like a regular keg.
Lets not forget the keg king junior, specifically designed for fermenting under pressure:
https://www.keg-king.com.au/fermenter-k ... oVl1z-PLBc ( I think there is a european site for these)
-
- Tippler
- Posts: 20
- Joined: Mon Jan 20, 2020 9:25 pm
Re: home made pressure fermentor for a trial run
a
Last edited by hedgerow pete on Sun Feb 02, 2020 2:19 pm, edited 1 time in total.
-
- Lost in an Alcoholic Haze
- Posts: 677
- Joined: Tue May 05, 2015 11:21 am
Re: home made pressure fermentor for a trial run
You would source your carbonation caps seperately, and one of those would have the internal barb that you can hopefully fit something like a 3/8" beer line dip tube to.
The plastic tee in the above link is just a tee, and doesnt include carb caps as far as I can see (not for that price certainly).
Re: home made pressure fermentor for a trial run
Looks very useful. Currently out of stock it seems but will definitely look to give this a go in future as don't have space for large kegs but a few 2l bottles in the fridge doors would be great for lagers or APA type beers.TheSumOfAllBeers wrote: ↑Wed Jan 29, 2020 4:52 pmYou would source your carbonation caps seperately, and one of those would have the internal barb that you can hopefully fit something like a 3/8" beer line dip tube to.
The plastic tee in the above link is just a tee, and doesnt include carb caps as far as I can see (not for that price certainly).