Just bought an Ss Brewtech 10 Gallon E-Kettle (EU version) but a UK supplier.
Contrary to what they say on the Ss Brewtech website you do not need to use their own very expensive econtroller and i used the existing Ss Brewtech C19 heater male socket and 3.5mm PT100 probe connections and made up my own leads to plug into the small pid controller panel.
Impressed with it,comes with a nice silcone mat,2 x 1.5” tri-clamp outlets and a 1.5” tri-clamp valve (but not the tri-clamp thermometer or the neoprene jacket) and 1 x 2” tri-clamp for the heater element,this is a lower wattage (than the USA version 5500 watt)2650watt EU version so it can run off a 13amp plug.
Just cleaned and assembled and test running it.
Ss Brewtech E-Kettle
Ss Brewtech E-Kettle
Last edited by nibber on Sat Jan 30, 2021 9:13 pm, edited 6 times in total.
Re: Ss Brewtech E-Kettle
Dont know why but it keeps adding the same photo to the 1st post but this is the other photo i was trying to upload to the original post