Ss Brewtech E-Kettle

The forum for discussing all kinds of brewing paraphernalia.
Post Reply
nibber
Steady Drinker
Posts: 46
Joined: Thu Aug 13, 2009 10:46 pm
Location: Ashford,Kent.

Ss Brewtech E-Kettle

Post by nibber » Sat Jan 30, 2021 3:08 pm

Just bought an Ss Brewtech 10 Gallon E-Kettle (EU version) but a UK supplier.
Contrary to what they say on the Ss Brewtech website you do not need to use their own very expensive econtroller and i used the existing Ss Brewtech C19 heater male socket and 3.5mm PT100 probe connections and made up my own leads to plug into the small pid controller panel.
Impressed with it,comes with a nice silcone mat,2 x 1.5” tri-clamp outlets and a 1.5” tri-clamp valve (but not the tri-clamp thermometer or the neoprene jacket) and 1 x 2” tri-clamp for the heater element,this is a lower wattage (than the USA version 5500 watt)2650watt EU version so it can run off a 13amp plug. :mrgreen:
Just cleaned and assembled and test running it. :beer:
Attachments
138013A7-06A7-4DCC-88E8-916235FC9E6E.jpeg
07BB49C6-4F9F-402B-BE47-B88CD601B21F.jpeg
Last edited by nibber on Sat Jan 30, 2021 9:13 pm, edited 6 times in total.

nibber
Steady Drinker
Posts: 46
Joined: Thu Aug 13, 2009 10:46 pm
Location: Ashford,Kent.

Re: Ss Brewtech E-Kettle

Post by nibber » Sat Jan 30, 2021 3:27 pm

Dont know why but it keeps adding the same photo to the 1st post :shock: but this is the other photo i was trying to upload to the original post :mrgreen:
0DDC966A-75C0-46AA-871F-EF5BF3E403FF.jpeg

Post Reply