6.7mm tubing
6.7mm tubing
Anyone know where I can get some tubing with an outside diametre of 6.7mm? I need it to fit very snugly inside some tubing of the same interior size.
Last edited by Goosey on Tue Aug 09, 2022 2:30 pm, edited 1 time in total.
Re: 6.7mm tubing
If you cannot find it then you can also get connectors (stainless steel and other materials depending on application) to join different sized tubing.
Re: 6.7mm tubing
Yes, connectors or just short lengths of rigid tubes would do.
Re: 6.7mm tubing
I have some 7.2 OD if that is any use
Ian
Ian
"You're not drunk if you can lie on the floor without holding on." Dean Martin
1. Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip
It's better to lose time with friends than to lose friends with time (Portuguese proverb)
Alone we travel faster
Together we travel further
( In an admonishing email from our golf club)
1. Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip
It's better to lose time with friends than to lose friends with time (Portuguese proverb)
Alone we travel faster
Together we travel further
( In an admonishing email from our golf club)
Re: 6.7mm tubing
Thanks Ian, but I'm trying to make a small valve for my cubitainers so they can let off gas in their own time
I've got a ball bearing pushing a spring inside a piece of tubing. The 6.7 mm tube needs to fit very snugly inside this tube as the ball bearing closes off the gas when pushed against it.
I've got a ball bearing pushing a spring inside a piece of tubing. The 6.7 mm tube needs to fit very snugly inside this tube as the ball bearing closes off the gas when pushed against it.