Wheeler's Beer Engine

If you use Beersmith, Promash, Beer Engine, or whatever, this is the place to discuss pros, cons, tips and tricks
Post Reply
User avatar
Jim
Site Admin
Posts: 9858
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Re: Wheeler's Beer Engine

Post by Jim » Sat May 04, 2019 6:53 pm

Welcome jimbob88. :)

You should have a private message from me.
"Reality is that which, when you stop believing in it, doesn't go away" - Philip K. Dick

JBK on Facebook
JBK on Twitter

Dave S
Even further under the Table
Posts: 2499
Joined: Sun Apr 01, 2012 5:38 pm
Location: Wirral, Merseyside

Re: Wheeler's Beer Engine

Post by Dave S » Mon May 06, 2019 2:47 pm

Initial thoughts: it needs a lot more work.

1. I don't seem to be able to change the defaults, even after pressing 'save all as defaults'.
2. In defaults editor what does 'boil volume scale' mean?
3. In defaults editor there is no provision for wort losses.
4. There is a yeast editor but no provision for adding yeast to a recipe.

I got fed up at this point.

I appreciate this is a work in progress and look forward to seeing it working properly. I'm assuming I have the most up-to-date issue - exe.win-amd64-3.6
Best wishes

Dave

User avatar
Jim
Site Admin
Posts: 9858
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Re: Wheeler's Beer Engine

Post by Jim » Mon May 06, 2019 3:14 pm

Just for information, a copy of the programme for Windows is available for download from the JBK server here (first option in the list):-

https://www.jimsbeerkit.co.uk/extras.htm

Thanks to Jimbob88 for allowing us to host it. :)

DaveS - once you have it running it will check for updates each time you run it, so you will always have the latest version.
"Reality is that which, when you stop believing in it, doesn't go away" - Philip K. Dick

JBK on Facebook
JBK on Twitter

jimbob88
Sober
Posts: 3
Joined: Sat May 04, 2019 2:42 pm

Re: Wheeler's Beer Engine

Post by jimbob88 » Mon May 06, 2019 5:06 pm

Dave S wrote:
Mon May 06, 2019 2:47 pm
Initial thoughts: it needs a lot more work.

1. I don't seem to be able to change the defaults, even after pressing 'save all as defaults'.
2. In defaults editor what does 'boil volume scale' mean?
3. In defaults editor there is no provision for wort losses.
4. There is a yeast editor but no provision for adding yeast to a recipe.

I got fed up at this point.

I appreciate this is a work in progress and look forward to seeing it working properly. I'm assuming I have the most up-to-date issue - exe.win-amd64-3.6
I'll tackle each but if this one at a time - also I thought it should be mentioned a few sections of Wheeler's Wort Works are not obvious to know the location of.

1) You need to press the done button before saving - this will be fixed soon but at the moment allows a user to save after making a change they realized is a mistake.

2) Boil Volume Scale is the change in Boil Volume when you input a change in the volume entry. By default is 110%, so if I were to input 10 into the volume area, it would put 11 into the boil volume section (litres)

3) Yeah the program is still work-in-progress and I can implement it, I just don't use it personally so never thought about it - I am not sure how to implement it at this point in time, anybody got any ideas/formulas?

4) Yeasts are added via the Experimental Attenuation Tab where you can add Water Chemistry Additions and Yeasts. You may ask, why there?, and to be honest the only reason is due to the fact I wished to keep to the ideology of Graham Wheeler's Beer Engine for the Engine Room and keep it with as little clutter as possible.

Dave S
Even further under the Table
Posts: 2499
Joined: Sun Apr 01, 2012 5:38 pm
Location: Wirral, Merseyside

Re: Wheeler's Beer Engine

Post by Dave S » Tue May 07, 2019 10:06 am

Jim wrote:
Mon May 06, 2019 3:14 pm
Just for information, a copy of the programme for Windows is available for download from the JBK server here (first option in the list):-

https://www.jimsbeerkit.co.uk/extras.htm

Thanks to Jimbob88 for allowing us to host it. :)

DaveS - once you have it running it will check for updates each time you run it, so you will always have the latest version.
Yes, the one I have running appears to be the same version, Jim, thanks.
Best wishes

Dave

Dave S
Even further under the Table
Posts: 2499
Joined: Sun Apr 01, 2012 5:38 pm
Location: Wirral, Merseyside

Re: Wheeler's Beer Engine

Post by Dave S » Tue May 07, 2019 10:07 am

thanks, jimbob, look forward to seeing it develop, and well done for taking it on.
Best wishes

Dave

jimbob88
Sober
Posts: 3
Joined: Sat May 04, 2019 2:42 pm

Re: Wheeler's Beer Engine

Post by jimbob88 » Fri May 17, 2019 7:33 pm

jimbob88 wrote:
Sat May 04, 2019 3:26 pm
Hi everybody, I am the creator of Wheeler's Wort Works and as well as the current version have been developing a web-based edition :D, and I was thinking of choosing how to host it but to know if it is worth investing in hosting it I have created a poll, I would be thankful if you replied so I can know whether or not to start hosting it!
The Poll: http://www.strawpoll.me/embed_1/17933765
A sneak peek of the online edition: http://i.imgur.com/23GwCTL.png

Development is slowly but steadily coming along!

Here is a preview of the current version: http://i.imgur.com/NpdfATy.png

At this moment in time I plan to release it without a Hop/Grist/Yeast Editor and maybe add these features later on down the road. :D

Hope you are all doing well,
Jim

Post Reply