SS Brewtech Setup
SS Brewtech Setup
Well - it has been a little while since I posted but here it is - my twin SS brewtech setup. It is made using a maxi 310 glycol chiller and 2 x 7 gallon standard chronical fermenter with a couple of extras. The controller are brewtech heater chiller Ines and I took them apart and rehoused them - inside it Controlls contractors and solenoid valves to direct the water flow - it seems to work pretty well
BossTronix 1 15 gallon pot brewery
2 x 7 gallon SS Brewtech Chronical
6 x Corny Kegs
in Keg 1 - Black Lager
in Keg 2 - Raspberryade
in Keg 3 - Devil's Backbone Clone
in Keg 4 - empty
in keg 5 - empty
in keg 6 - empty
Tap 1 - Black lager
Tap 2 - Raspberryade
2 x 7 gallon SS Brewtech Chronical
6 x Corny Kegs
in Keg 1 - Black Lager
in Keg 2 - Raspberryade
in Keg 3 - Devil's Backbone Clone
in Keg 4 - empty
in keg 5 - empty
in keg 6 - empty
Tap 1 - Black lager
Tap 2 - Raspberryade
Re: SS Brewtech Setup
that looks amazing, what a great setup!
Planning: BrewEasy system build; possibly a Wychwood Hobgoblin Gold clone
Fermenting: Simcoe SMASH
Drinking: Cascade Centennial Pale
Fermenting: Simcoe SMASH
Drinking: Cascade Centennial Pale
-
Fil
- Telling imaginary friend stories
- Posts: 5229
- Joined: Sun Oct 16, 2011 1:49 pm
- Location: Cowley, Oxford
Re: SS Brewtech Setup
lurvely 
just as icing on the cake I would consider lagging the coolant transport tubes tho, BES sell armoflex tube insulation in imperial tube sizes
just as icing on the cake I would consider lagging the coolant transport tubes tho, BES sell armoflex tube insulation in imperial tube sizes ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
Re: SS Brewtech Setup
I have some armour flex that is next on the list lolBossTronix 1 15 gallon pot brewery
2 x 7 gallon SS Brewtech Chronical
6 x Corny Kegs
in Keg 1 - Black Lager
in Keg 2 - Raspberryade
in Keg 3 - Devil's Backbone Clone
in Keg 4 - empty
in keg 5 - empty
in keg 6 - empty
Tap 1 - Black lager
Tap 2 - Raspberryade
2 x 7 gallon SS Brewtech Chronical
6 x Corny Kegs
in Keg 1 - Black Lager
in Keg 2 - Raspberryade
in Keg 3 - Devil's Backbone Clone
in Keg 4 - empty
in keg 5 - empty
in keg 6 - empty
Tap 1 - Black lager
Tap 2 - Raspberryade
-
rootsbrew
Re: SS Brewtech Setup
That's an impressive use of a garden shed! All the Ss things look very smart. Most importantly, does the beer turn out well?
-
Fil
- Telling imaginary friend stories
- Posts: 5229
- Joined: Sun Oct 16, 2011 1:49 pm
- Location: Cowley, Oxford
Re: SS Brewtech Setup
Just noticed the leg extensions..
https://www.ssbrewtech.com/collections/ ... -fermenter
what size is the box section used for your legs? and how much 'bare' leg do they need to slip up and over? I too have a similar sight glass to yours for a visual aid when dumping but my legs are too short to accommodate it, my legs however have a SS rod about an inch or 2 up from the bottom that runs between them for stability its Not a SS brewtech FV..
https://www.ssbrewtech.com/collections/ ... -fermenter
what size is the box section used for your legs? and how much 'bare' leg do they need to slip up and over? I too have a similar sight glass to yours for a visual aid when dumping but my legs are too short to accommodate it, my legs however have a SS rod about an inch or 2 up from the bottom that runs between them for stability its Not a SS brewtech FV..
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
-
guypettigrew
- Even further under the Table
- Posts: 2719
- Joined: Mon Mar 22, 2010 7:10 pm
- Location: Christchurch, Dorset
Re: SS Brewtech Setup
Hi
I see you're still using the SS vinyl tubing with jubilee clips for your cooling coils.
Can I suggest you think about 8mm internal diameter (I think--may be 10mm ID) silicone tubing? Fits perfectly, bends easily and there's never any worry about it pulling off.
Makes life a lot easier!
Guy
I see you're still using the SS vinyl tubing with jubilee clips for your cooling coils.
Can I suggest you think about 8mm internal diameter (I think--may be 10mm ID) silicone tubing? Fits perfectly, bends easily and there's never any worry about it pulling off.
Makes life a lot easier!
Guy
Re: SS Brewtech Setup
I'd be interested in more info on the solenoid setup. I have a maxi but currently just on 1 fv using an inkbird
, impressive setup.