Which bottles can I use?

Discuss making up beer kits - the simplest way to brew.
RichardG

Post by RichardG » Fri Aug 29, 2008 11:38 am

To follow on from earlier comments, I've got the brown bulmers/magnars bottles from the local pub. They were more than happy to keep them for me, they cap easily, hold 568ml, and I've collected something like 100+ in a short time! This 'cider over ice' malarky seems popular (can't see it myself!).

ADDLED

Post by ADDLED » Fri Aug 29, 2008 5:57 pm

The ice adds flavour.

Bongo

Post by Bongo » Fri Aug 29, 2008 6:17 pm

ADDLED wrote:The ice adds flavour.
Indubitably

User avatar
Aleman
It's definitely Lock In Time
Posts: 6132
Joined: Sun Jun 03, 2007 11:56 am
Location: Mashing In Blackpool, Lancashire, UK

Post by Aleman » Fri Aug 29, 2008 6:53 pm

StrangeBrew wrote:Landlord/Magners/Bulmers are a better shape for pouring!
The 'shoulder' on a fullers type bottle is designed to hold back the yeast apparently, which makes them easier to pour from

<Gloves On>

User avatar
Jim
Site Admin
Posts: 10305
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Post by Jim » Fri Aug 29, 2008 7:56 pm

Aleman wrote:
StrangeBrew wrote:Landlord/Magners/Bulmers are a better shape for pouring!
The 'shoulder' on a fullers type bottle is designed to hold back the yeast apparently, which makes them easier to pour from

<Gloves On>
I find that the Landlord type bottles are easier to pour from. The yeast floats on top of the beer as you pour the last bit, so I don't see how the shoulder on the bottle will stop it. :?
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

User avatar
Stonechat
Under the Table
Posts: 1428
Joined: Tue Feb 05, 2008 6:33 pm

Post by Stonechat » Fri Aug 29, 2008 8:43 pm

I don't think it's worth getting the gloves on for :wink:
Both TT Landlord and Fullers bottles are brown, the labels soak off easily and the beer tastes good.
It's a question of what you have confidence in and because Fullers bottles are designed to hold bottle-conditioned beer I have faith in them.
Fullers bottles weigh 446g against TT Landlord's 406g. They are my favourites and I have never had one explode or break when capping.
I have over 300 Fullers bottles in the garage, but only 10 TT Landlord, which I've never used, but will when I buy another 2 bottles.

I would urge any newbies to start collecting Fullers bottles before they join the other brewers who have gone over to the "eco-friendly " thinner glass :D

User avatar
StrangeBrew
Under the Table
Posts: 1046
Joined: Sun Nov 12, 2006 7:07 pm
Location: A shed in Kent

Post by StrangeBrew » Fri Aug 29, 2008 8:47 pm

Aleman wrote:
StrangeBrew wrote:Landlord/Magners/Bulmers are a better shape for pouring!
The 'shoulder' on a fullers type bottle is designed to hold back the yeast apparently, which makes them easier to pour from

<Gloves On>
I find that all the shoulder manages to achieve is (if you're not being careful or are inexperienced) is to give a yeast disturbing 'glug glug glug'.
Far easier to control the pour with sloped necked bottles imo but it's a personal preference so each to his own.

User avatar
StrangeBrew
Under the Table
Posts: 1046
Joined: Sun Nov 12, 2006 7:07 pm
Location: A shed in Kent

Post by StrangeBrew » Sun Aug 31, 2008 11:05 am

Stonechat wrote:Fullers bottles weigh 446g against TT Landlord's 406g.
Just out of interest I weighed a TT Landlord 500ml on my digi scales and it came out at 410g and my original near pint bottles 550ml weigh in at a mighty 466g.
Both of these bottles I have conifidence in but...

The weight of a 'Badger new age save the planet light weight bottle' is 304g and I should imagine that Marstons are of a similar weight too. You can feel the difference in weight and strength of the glass compared to the two bottles mentioned above and so personally I wouldn't risk using light weights for homebrew.

Post Reply