Bag in a box dispensing (Beer Engine)
Re: Bag in a box dispensing (Beer Engine)
Thanks
I tend to bottle 20l batches but might get some of the smaller ones for drinking first
I tend to bottle 20l batches but might get some of the smaller ones for drinking first
Re: Bag in a box dispensing (Beer Engine)
These are pretty interesting, although if you were dispensing straight from the tap on the bag would you end up with a load of sediment?
- jmc
- Even further under the Table
- Posts: 2486
- Joined: Thu May 13, 2010 11:43 pm
- Location: Swaledale, North Yorkshire
Re: Bag in a box dispensing (Beer Engine)
Dispensing straight from the tap is what they're designed for and its how the majority of punters use them when they buy beer from breweries.walrusdunne wrote:These are pretty interesting, although if you were dispensing straight from the tap on the bag would you end up with a load of sediment?
When the tap is fitted correctly in its box, its at a raised level to allow sediment to drop below it.
My mate got the 'rough' version (with live yeast) from Tring as he knew I'd be after the yeast when he finished with it.
When he got it home it was cloudy due to live yeast ( and I suspect finings) but apparently it was clear after if had rested for a few days.
Re: Bag in a box dispensing (Beer Engine)
As previous post, the taps sightly raised the way the bag sits in the box. You get about 1/2 - 3/4 pint of waste at the end of the boxwalrusdunne wrote:These are pretty interesting, although if you were dispensing straight from the tap on the bag would you end up with a load of sediment?
Re: Bag in a box dispensing (Beer Engine)
Cheers for the replies. Might have to invest in a couple of these and give em a go.
-
- Piss Artist
- Posts: 153
- Joined: Sat Apr 06, 2013 9:46 pm
- Location: Hounslow (and Barnstable at weekends)
Re: Bag in a box dispensing (Beer Engine)
can I ask how long do you need to leave beer to condition? Usually I would do 1 or 2 weeks in warm so the added sugar carbonates and then 2 more weeks before drinking. But no carbonation on this so is it just the 2 weeks?
c
c
Re: Bag in a box dispensing (Beer Engine)
You need to be careful about over priming. I generally fill the bag a point or so above final gravity then let it finish over the next week in the bag to get a gentle fizz . Remember there's still residual co2 in solution which is more than enough for beer for me that is.
-
- Piss Artist
- Posts: 153
- Joined: Sat Apr 06, 2013 9:46 pm
- Location: Hounslow (and Barnstable at weekends)
Re: Bag in a box dispensing (Beer Engine)
I've not added any sugar to the bag and filled it at about 4c so expecting some co2 to be present. More a question about how long to let mature? A week or 2 long enough.
c
c
Re: Bag in a box dispensing (Beer Engine)
About a week to ten days at 12c. Lift your box upright so you can bleed off any co2 though the tap now and again as the bags are not as strong as a polypin. Alternatively to reduce pressure just pull a pint 

Re: Bag in a box dispensing (Beer Engine)
Excellent clean setup. Good stuff!
I'm currently using two pins connected to a pump, but when they eventually go bust I think I'll look at using these too.
Any chance you can post the measurements of the outside boxes? I'm thinking about how many I can get in my fridge!
I'm currently using two pins connected to a pump, but when they eventually go bust I think I'll look at using these too.
Any chance you can post the measurements of the outside boxes? I'm thinking about how many I can get in my fridge!
Re: Bag in a box dispensing (Beer Engine)
Here's the 10 ltr boxandybiochem wrote:Excellent clean setup. Good stuff!
I'm currently using two pins connected to a pump, but when they eventually go bust I think I'll look at using these too.
Any chance you can post the measurements of the outside boxes? I'm thinking about how many I can get in my fridge!

Untitled by Pabzki, on Flickr

Untitled by Pabzki, on Flickr
Here's the 20 ltr

Untitled by Pabzki, on Flickr

Untitled by Pabzki, on Flickr
Here's a 20 ltr bag I've got conditioning, bagged at 1013 three days ago after 5 days fermentation. I squashed all the air out when I bagged it but you can see it's just starting to billow out . I'll vent in a couple of days or so depending on how much co2 is in the bag. I'm expecting another point or so drop.
Note the tap is pushed in just one click so I can pull out to vent. Once vented it'll be pushed all the way in.

Untitled by Pabzki, on Flickr
Re: Bag in a box dispensing (Beer Engine)
Last time I seen a bag in a box it was at my step mams funeral.....
Re: Bag in a box dispensing (Beer Engine)
Nice..........Take it you didn't care for your stepmother thengibbiem wrote:Last time I seen a bag in a box it was at my step mams funeral.....

Re: Bag in a box dispensing (Beer Engine)
Nofolkandchance wrote: Here's the 10 ltr box....
Wow thanks, pics as well!
I'll be doing some measuring up tonight!