Bergland Stock Pot cutting
- barneey
- Telling imaginary friend stories
- Posts: 5423
- Joined: Mon Jul 25, 2011 10:42 pm
- Location: East Kent
Bergland Stock Pot cutting
Has anyone ever cut a bergland stock pot in half, ie start with a 70 ltr pot and end up with a 35 ltr pot.
If so what did you use to cut the stainless with?
The only way I can think to cut it is with an angle grinder.
If so what did you use to cut the stainless with?
The only way I can think to cut it is with an angle grinder.
Hair of the dog, bacon, butty.
Hops, cider pips & hello.
Name the Movie + song :)
Hops, cider pips & hello.
Name the Movie + song :)
Re: Berland Stock Pot cutting
No but a lot of people make a mess of Thermopot bases with an angle grinder. With the angle grinder fixed and turning the pot against a ply jig I would have thought it would work. BUT the strength in a pot is in the rim and base, it's walls are very thin, I would worry that the sides would bucklle and twist as soon as the rim was removed. So silver solder a new rim before cutting???
aka Rhys
- barneey
- Telling imaginary friend stories
- Posts: 5423
- Joined: Mon Jul 25, 2011 10:42 pm
- Location: East Kent
Re: Berland Stock Pot cutting
The idea is to fit the half, with the rim on it, to the underside of another stainless pot.
So I HOPE that by keeping the rim of the 70 and bolting / fixing through the upstand on the other pot it will be enough to support its self? without issue, the problem is I don't think its ever been tried before.
I take you point about angle grinders and pots and making a mess of things rather quickly.
I might have to see how high it sits without adjustment.
Cheers
EDIT I might have to save myself a lot of hassle and just get a smaller pot
http://www.ebay.co.uk/itm/Pardini-700-C ... 1477229255?
So I HOPE that by keeping the rim of the 70 and bolting / fixing through the upstand on the other pot it will be enough to support its self? without issue, the problem is I don't think its ever been tried before.
I take you point about angle grinders and pots and making a mess of things rather quickly.
I might have to see how high it sits without adjustment.
Cheers
EDIT I might have to save myself a lot of hassle and just get a smaller pot
http://www.ebay.co.uk/itm/Pardini-700-C ... 1477229255?
Hair of the dog, bacon, butty.
Hops, cider pips & hello.
Name the Movie + song :)
Hops, cider pips & hello.
Name the Movie + song :)
-
- Telling imaginary friend stories
- Posts: 5229
- Joined: Sun Oct 16, 2011 1:49 pm
- Location: Cowley, Oxford
Re: Berland Stock Pot cutting
u could use a nibbling tool air powered would be a doddle hand powered will take a few stabs n rests but ive used a hand nibbler on thicker SS over 1mm ok (eventually)
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
- thepatchworkdoll
- Piss Artist
- Posts: 142
- Joined: Sun Nov 10, 2013 8:11 pm
Re: Berland Stock Pot cutting
Hey Barney
Please be careful if your using an angle grinder. I thought I was very careful using angle grinders until I had an accident with one 14 years ago.
Regards
Patch
www.dropbox.com/s/1l743xqb9ma0e0q/My%20Face.gif
Please be careful if your using an angle grinder. I thought I was very careful using angle grinders until I had an accident with one 14 years ago.
Regards
Patch
www.dropbox.com/s/1l743xqb9ma0e0q/My%20Face.gif
- barneey
- Telling imaginary friend stories
- Posts: 5423
- Joined: Mon Jul 25, 2011 10:42 pm
- Location: East Kent
Re: Berland Stock Pot cutting
The photo is truely a good reminder of how everyone should be careful when using power tools & not to get complacent with their use. Thanks for sharing the photo, I trust things are "nearly" back to normal 14 years on?
I might therefore just save myself a load of hassle and buy the shorter pot.
I might therefore just save myself a load of hassle and buy the shorter pot.
Hair of the dog, bacon, butty.
Hops, cider pips & hello.
Name the Movie + song :)
Hops, cider pips & hello.
Name the Movie + song :)
-
- Even further under the Table
- Posts: 2999
- Joined: Wed May 09, 2012 6:42 pm
- Location: Warrington England usually drunk or being mithered by my 2yr old or wife
Re: Berland Stock Pot cutting
Where's scotia he'll know
Re: Berland Stock Pot cutting
I use what we call a skinny disk http://www.ebay.co.uk/itm/Klingspor-thi ... 2a2e444796 I find for best results score the metal first with the cutting disc along the line to be cut 4/5 inches at a time or 100 / 125 mm (you can use masking tape if you do not feel confident enough) this way it gives a guide for the disc to follow. Dont try cutting all the way through and then following the line best results are achieved the other way. "DISCLAMER "p.s. use the appropriate safety gear.
Wha's Like Us? Damn Few And They're A' Died!
-
- Telling imaginary friend stories
- Posts: 5229
- Joined: Sun Oct 16, 2011 1:49 pm
- Location: Cowley, Oxford
Re: Bergland Stock Pot cutting
Give your wrist a workout
when nibbling out 4-5mm a time u cant go too far off the guideline
though it wont be fast
when nibbling out 4-5mm a time u cant go too far off the guideline
though it wont be fast
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate
- Kev888
- So far gone I'm on the way back again!
- Posts: 7701
- Joined: Fri Mar 19, 2010 6:22 pm
- Location: Derbyshire, UK
Re: Bergland Stock Pot cutting
I cut a nordic/french stock pot with an angle grinder, as scotia said I used a very narrow disk (specifically for inox/stainless) and it went through really very easily IIRC. The metal is thin and floppy and may try to twist as the cut releases stresses, so I sort of tickled my way along with no real pressure, and once broken through allowed only a small amount of the disk into the cut. The only real challenge was to keep it on course, but I didn't find it too hard to go 'reasonably' straight; with being narrow it cut forward much more easily and had less tendency to go sidewards.
As mentioned above, the resulting edge is reasonably floppy without a rim, and fairly sharp until smoothed down. I also hear that the thin discs can pop relatively easily too, so patch's post is a timely reminder.
Cheers
Kev
As mentioned above, the resulting edge is reasonably floppy without a rim, and fairly sharp until smoothed down. I also hear that the thin discs can pop relatively easily too, so patch's post is a timely reminder.
Cheers
Kev
Kev
- jmc
- Even further under the Table
- Posts: 2486
- Joined: Thu May 13, 2010 11:43 pm
- Location: Swaledale, North Yorkshire
Re: Berland Stock Pot cutting
barneey wrote:...
EDIT I might have to save myself a lot of hassle and just get a smaller pot
http://www.ebay.co.uk/itm/Pardini-700-C ... 1477229255?
Aren't those Aluminium with SS handles like these
- barneey
- Telling imaginary friend stories
- Posts: 5423
- Joined: Mon Jul 25, 2011 10:42 pm
- Location: East Kent
Re: Bergland Stock Pot cutting
Thanks JMC, I didn't notice that, a little bit misguiding on the eBay advert.
The 70Lt pot has arrived so will see if that fits first before anything else.
The 70Lt pot has arrived so will see if that fits first before anything else.
Hair of the dog, bacon, butty.
Hops, cider pips & hello.
Name the Movie + song :)
Hops, cider pips & hello.
Name the Movie + song :)
- barneey
- Telling imaginary friend stories
- Posts: 5423
- Joined: Mon Jul 25, 2011 10:42 pm
- Location: East Kent
Re: Bergland Stock Pot cutting
Firstly thank you all for your input, I have purchased a cutting disc as it will always come in handy.
I`ve tried the 70lt on the BM and its a good fit + plenty of room to get it bolted together.
The height isn't bad either at 1.10m tall so it can be floor sited.
So will keep the pot as it is + cut vent holes + cut circular holes in the bottom of 70 lt pot for the fittings from the BM.
I`ve tried the 70lt on the BM and its a good fit + plenty of room to get it bolted together.
The height isn't bad either at 1.10m tall so it can be floor sited.
So will keep the pot as it is + cut vent holes + cut circular holes in the bottom of 70 lt pot for the fittings from the BM.
Hair of the dog, bacon, butty.
Hops, cider pips & hello.
Name the Movie + song :)
Hops, cider pips & hello.
Name the Movie + song :)