Oxygen set up
Oxygen set up
So I’m just looking through my b day present, and the hose seems to be a problem.
The hose fits the diffuser but the reg (which seems to be commonly used in the brewing scene) has a tiny barb.
Now I looked at fitting a 8mm x1/4 BSP fitting but inside there is a small diffuser also.
What did other folks do?
Sent from my iPhone using Tapatalk Pro
The hose fits the diffuser but the reg (which seems to be commonly used in the brewing scene) has a tiny barb.
Now I looked at fitting a 8mm x1/4 BSP fitting but inside there is a small diffuser also.
What did other folks do?
Sent from my iPhone using Tapatalk Pro
Sabro Single Hop NEIPA 25/02/20 CLICK ME to monitor progress with Brewfather & iSpindel
-
- Piss Artist
- Posts: 199
- Joined: Thu Jan 21, 2016 12:02 am
Re: Oxygen set up
This is my set up
Last edited by richard080561 on Fri Sep 14, 2018 9:04 pm, edited 1 time in total.
Richard M
Cardiff
Cardiff
Re: Oxygen set up
Cannot see the picture unfortunately.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Sabro Single Hop NEIPA 25/02/20 CLICK ME to monitor progress with Brewfather & iSpindel
Re: Oxygen set up
Did that work?
-
- Piss Artist
- Posts: 199
- Joined: Thu Jan 21, 2016 12:02 am
Re: Oxygen set up
How much do you use?
They sell the small cans on Ebay and it works out at about £1 per litre.
It could be an expensive way to boost your fermentation if you need a few litres each time.
They sell the small cans on Ebay and it works out at about £1 per litre.
It could be an expensive way to boost your fermentation if you need a few litres each time.
-
- Piss Artist
- Posts: 199
- Joined: Thu Jan 21, 2016 12:02 am
Re: Oxygen set up
I set flow rate to 1 litre per minute for 1 minute. The cylinder in the photo has lasted a lot of brews. I haven't been counting
Richard M
Cardiff
Cardiff
Re: Oxygen set up
If you right click on your image, you should get an option to "copy image address".
You then need to use the full editor, then click on the insert image icon, then you should get this " ", paste the image address in the space between the square brackets.
You then need to use the full editor, then click on the insert image icon, then you should get this " ", paste the image address in the space between the square brackets.
-
- Piss Artist
- Posts: 199
- Joined: Thu Jan 21, 2016 12:02 am
Re: Oxygen set up
Is this the flow meter you have plumbed in https://www.ebay.co.uk/i/172808381009?chn=ps
I buy my grain & hops from here http://www.homebrewkent.co.uk/
I have taken more out of alcohol than alcohol has taken out of me - Winston Churchill
I have taken more out of alcohol than alcohol has taken out of me - Winston Churchill
-
- Piss Artist
- Posts: 199
- Joined: Thu Jan 21, 2016 12:02 am
Re: Oxygen set up
That looks lovely like the same oneFUBAR wrote: ↑Fri Sep 14, 2018 10:48 pmIs this the flow meter you have plumbed in https://www.ebay.co.uk/i/172808381009?chn=ps
Richard M
Cardiff
Cardiff
Oxygen set up
That’s perfect! I’ll make one just like that, thanks for your help.
So the little filter and spring made no difference?
Do you boil your stone of just soak it in star san?
So the little filter and spring made no difference?
Do you boil your stone of just soak it in star san?
Sabro Single Hop NEIPA 25/02/20 CLICK ME to monitor progress with Brewfather & iSpindel
-
- Piss Artist
- Posts: 199
- Joined: Thu Jan 21, 2016 12:02 am
Re: Oxygen set up
I rinse it with water after use and spray with starsan before use
Richard M
Cardiff
Cardiff
-
- Hollow Legs
- Posts: 319
- Joined: Sun Oct 30, 2011 10:20 am
Re: Oxygen set up
Richard
What sized thread it the JG fitting going into the regulator?
Cheers
Rich
What sized thread it the JG fitting going into the regulator?
Cheers
Rich