Water profile for a Pale ale
Water profile for a Pale ale
Hi
I got a water report from wallybrew so Im not looking at what to target for a Mosaic Pale ale, I've not really learned too much RE water yet but I found a profile online that a few people have said is a good base for hoppy ipa's / pales ?
Can anyone comment or suggest something to aim for please ?
Many Thanks
Jim
Calcium 110
Mag 18
Sodium 17
sulfate 350
chloride 50
bicarb 27
PH 7.0
I got a water report from wallybrew so Im not looking at what to target for a Mosaic Pale ale, I've not really learned too much RE water yet but I found a profile online that a few people have said is a good base for hoppy ipa's / pales ?
Can anyone comment or suggest something to aim for please ?
Many Thanks
Jim
Calcium 110
Mag 18
Sodium 17
sulfate 350
chloride 50
bicarb 27
PH 7.0
- orlando
- So far gone I'm on the way back again!
- Posts: 7197
- Joined: Thu Nov 17, 2011 3:22 pm
- Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt
Re: Water profile for a Pale ale
Looks good as is but if you up your calcium to closer to 200 you'd be nigh on perfect with that. Ignore the pH value by the way, it's the mash pH that counts.Bigbud78 wrote:Hi
I got a water report from wallybrew so Im not looking at what to target for a Mosaic Pale ale, I've not really learned too much RE water yet but I found a profile online that a few people have said is a good base for hoppy ipa's / pales ?
Can anyone comment or suggest something to aim for please ?
Many Thanks
Jim
Calcium 110
Mag 18
Sodium 17
sulfate 350
chloride 50
bicarb 27
PH 7.0
I am "The Little Red Brooster"
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Re: Water profile for a Pale ale
Awesome thanks
-
- Even further under the Table
- Posts: 2514
- Joined: Sun Apr 01, 2012 5:38 pm
- Location: Wirral, Merseyside
Re: Water profile for a Pale ale
Yes, and maybe up the calcium using calcium chloride flake to increas the chloride level a bit. A 7:1 Sulphate:Chloride ratio might make it overly dry.orlando wrote:Looks good as is but if you up your calcium to closer to 200 you'd be nigh on perfect with that. Ignore the pH value by the way, it's the mash pH that counts.Bigbud78 wrote:Hi
I got a water report from wallybrew so Im not looking at what to target for a Mosaic Pale ale, I've not really learned too much RE water yet but I found a profile online that a few people have said is a good base for hoppy ipa's / pales ?
Can anyone comment or suggest something to aim for please ?
Many Thanks
Jim
Calcium 110
Mag 18
Sodium 17
sulfate 350
chloride 50
bicarb 27
PH 7.0
Best wishes
Dave
Dave
- orlando
- So far gone I'm on the way back again!
- Posts: 7197
- Joined: Thu Nov 17, 2011 3:22 pm
- Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt
Re: Water profile for a Pale ale
Excellent point, good spot.Dave S wrote:
Yes, and maybe up the calcium using calcium chloride flake to increas the chloride level a bit. A 7:1 Sulphate:Chloride ratio might make it overly dry.
I am "The Little Red Brooster"
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Re: Water profile for a Pale ale
Based on twiddling with Bru'n water for hours I ended up with
Calcium 130
Mag 17
Sodium 18
sulfate 319
chloride 49
bicarb 28
No idea what it'll be like, have to wait and see. I found to get the calcium higher my sulphate level was just too high and the mash ph was I believe to high, if any one wants to look at my water report numbers and let me know what I should have done in bru n water Id be grateful so I know where to go next time xD
Calcium 130
Mag 17
Sodium 18
sulfate 319
chloride 49
bicarb 28
No idea what it'll be like, have to wait and see. I found to get the calcium higher my sulphate level was just too high and the mash ph was I believe to high, if any one wants to look at my water report numbers and let me know what I should have done in bru n water Id be grateful so I know where to go next time xD
- orlando
- So far gone I'm on the way back again!
- Posts: 7197
- Joined: Thu Nov 17, 2011 3:22 pm
- Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt
Re: Water profile for a Pale ale
Bigbud78 wrote:Based on twiddling with Bru'n water for hours I ended up with
Calcium 130
Mag 17
Sodium 18
sulfate 319
chloride 49
bicarb 28
No idea what it'll be like, have to wait and see. I found to get the calcium higher my sulphate level was just too high and the mash ph was I believe to high, if any one wants to look at my water report numbers and let me know what I should have done in bru n water Id be grateful so I know where to go next time xD
Did you see DaveS' comment above? Use calcium chloride to rise the calcium level.
I am "The Little Red Brooster"
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
- Jocky
- Even further under the Table
- Posts: 2738
- Joined: Sat Nov 12, 2011 6:50 pm
- Location: Epsom, Surrey, UK
Re: Water profile for a Pale ale
If you post your actual water profile as from wallybrew then someone can do the hard work for you and explain how to best adjust your water.
I spent ages twiddling knobs in Bru n Water but eventually I found it was vastly overcomplicating things and giving me warnings over things I didn't need to worry about.
I spent ages twiddling knobs in Bru n Water but eventually I found it was vastly overcomplicating things and giving me warnings over things I didn't need to worry about.
Ingredients: Water, Barley, Hops, Yeast, Seaweed, Blood, Sweat, The swim bladder of a sturgeon, My enemies tears, Scenes of mild peril, An otter's handbag and Riboflavin.
- Eric
- Even further under the Table
- Posts: 2879
- Joined: Fri Mar 13, 2009 1:18 am
- Location: Sunderland.
Re: Water profile for a Pale ale
Yes please. You will get a drier beer than I would care for with that profile, but there will be many other factors at play like mash temperature and time, yeast as well as the recipe.Bigbud78 wrote:Based on twiddling with Bru'n water for hours I ended up with
Calcium 130
Mag 17
Sodium 18
sulfate 319
chloride 49
bicarb 28
No idea what it'll be like, have to wait and see. I found to get the calcium higher my sulphate level was just too high and the mash ph was I believe to high, if any one wants to look at my water report numbers and let me know what I should have done in bru n water Id be grateful so I know where to go next time xD
Without patience, life becomes difficult and the sooner it's finished, the better.
Re: Water profile for a Pale ale
I already have a pale with that profile chugging away now but any help towards my next would definitely be appreciated
Sodium as Na, mg/L 1.0
Potassium as K, mg/L 5.3
Magnesium as Mg, mg/L 0.6
Calcium as Ca, mg/L 9.3
Chloride as Cl, mg/L 5.7
Nitrate as NO3, mg/L 1.1
Phosphate as PO4, mg/L 5.4
Sulphate as SO4, mg/L 7.0
Total alkalinity as CaCO3, mg/L 11
pH 6.35
Conductivity, uScm 58.6 -1 at 20C
Total residual chlorine as Cl2, mg/L 0.02
Sodium as Na, mg/L 1.0
Potassium as K, mg/L 5.3
Magnesium as Mg, mg/L 0.6
Calcium as Ca, mg/L 9.3
Chloride as Cl, mg/L 5.7
Nitrate as NO3, mg/L 1.1
Phosphate as PO4, mg/L 5.4
Sulphate as SO4, mg/L 7.0
Total alkalinity as CaCO3, mg/L 11
pH 6.35
Conductivity, uScm 58.6 -1 at 20C
Total residual chlorine as Cl2, mg/L 0.02
- Eric
- Even further under the Table
- Posts: 2879
- Joined: Fri Mar 13, 2009 1:18 am
- Location: Sunderland.
Re: Water profile for a Pale ale
There's nothing wrong with that profile, just that from my experience it normally produces a beer too dry with most recipes for my taste, although when aged takes on a more mellow characteristic.Bigbud78 wrote:I already have a pale with that profile chugging away now but any help towards my next would definitely be appreciated
I don't use Bru'nwater simply because Martin's taste is very different to my own effectively suggesting I use different water to that coming out of my tap.
There's very little in your water as you obviously know. I'll suggest that next time you try the same recipe, do it with more equal amounts of sulphate and chloride for comparison.
Sodium is very low and does impart flavour, something to bear in mind later.
Magnesium is important for yeast and while malt supplies a significant quantity, it may be worth adding some Epsom Salts to the boil.
Calcium is the most important ion in brewing playing the major role in a vast number of the reations at every stage of the process. It lowers pH at every stage and as your water has little alkalinity to raise pH, you might not find the need for much calcium in the mash for a suitable pH. However, once that small quantity of calcium is used there would be need to add extra calcium later to minimise any rise in pH to cause unwanted products passing through to spoil what might otherwise be better.
There is no single perfect water profile, but your water will require some alkalinity adding if you venture into making darker beers or maybe even when using a moderate amount of crystal malt. Otherwise, keep a record of what profile you have used and notes on your findings for the beer's taste and other properties.
Without patience, life becomes difficult and the sooner it's finished, the better.
- orlando
- So far gone I'm on the way back again!
- Posts: 7197
- Joined: Thu Nov 17, 2011 3:22 pm
- Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt
Re: Water profile for a Pale ale
A decent pH meter to monitor the effect on the mash could prove very useful too.Eric wrote:There's nothing wrong with that profile, just that from my experience it normally produces a beer too dry with most recipes for my taste, although when aged takes on a more mellow characteristic.Bigbud78 wrote:I already have a pale with that profile chugging away now but any help towards my next would definitely be appreciated
I don't use Bru'nwater simply because Martin's taste is very different to my own effectively suggesting I use different water to that coming out of my tap.
There's very little in your water as you obviously know. I'll suggest that next time you try the same recipe, do it with more equal amounts of sulphate and chloride for comparison.
Sodium is very low and does impart flavour, something to bear in mind later.
Magnesium is important for yeast and while malt supplies a significant quantity, it may be worth adding some Epsom Salts to the boil.
Calcium is the most important ion in brewing playing the major role in a vast number of the reations at every stage of the process. It lowers pH at every stage and as your water has little alkalinity to raise pH, you might not find the need for much calcium in the mash for a suitable pH. However, once that small quantity of calcium is used there would be need to add extra calcium later to minimise any rise in pH to cause unwanted products passing through to spoil what might otherwise be better.
There is no single perfect water profile, but your water will require some alkalinity adding if you venture into making darker beers or maybe even when using a moderate amount of crystal malt. Otherwise, keep a record of what profile you have used and notes on your findings for the beer's taste and other properties.
I am "The Little Red Brooster"
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
- Eric
- Even further under the Table
- Posts: 2879
- Joined: Fri Mar 13, 2009 1:18 am
- Location: Sunderland.
Re: Water profile for a Pale ale
Yes, a pH meter to monitor the mash. I think we can over rely on a single early reading which may provide a warning of all not being as it should, but it's the pH at the end of the mash that is more likely to indicate if there was a problem, particularly when fly sparging or at a high level of extraction efficiency.
Without patience, life becomes difficult and the sooner it's finished, the better.
- orlando
- So far gone I'm on the way back again!
- Posts: 7197
- Joined: Thu Nov 17, 2011 3:22 pm
- Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt
Re: Water profile for a Pale ale
Eric wrote:Yes, a pH meter to monitor the mash. I think we can over rely on a single early reading which may provide a warning of all not being as it should, but it's the pH at the end of the mash that is more likely to indicate if there was a problem, particularly when fly sparging or at a high level of extraction efficiency.
Taking the pH of last runnings is a good guide. Under 6 and you should be OK and avoid the worst of tannin extraction.
I am "The Little Red Brooster"
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
- Eric
- Even further under the Table
- Posts: 2879
- Joined: Fri Mar 13, 2009 1:18 am
- Location: Sunderland.
Re: Water profile for a Pale ale
5.6 in my book.
Without patience, life becomes difficult and the sooner it's finished, the better.