Hop back

The forum for discussing all kinds of brewing paraphernalia.
Vossy1

Post by Vossy1 » Sun Jan 07, 2007 12:39 pm

Nice work scooby :wink:

Interesting to hear your view on the flavour/aroma when using the hop back. This will be my next project 8)
Do these 'own brand' versions have the same temperature ratings as the Lock and Lock stuff?
I'm not sure, but I would imagine if they've got microwave safe on them, then they should be alright :wink:

steve_flack

Post by steve_flack » Sun Jan 07, 2007 4:05 pm

Frothy wrote:Anyone seen these locking containers anywhere else?
i.e. Tesco? M&S?
I think I've bought Lock 'n' lock brand from Waitrose before. As is to be expected from Waitrose they're good but expensive.

tubby_shaw

Post by tubby_shaw » Sun Jan 07, 2007 4:21 pm

The stuff bought from Tesco has a microwave symbol and 110ºC moulded into the base. But as I don't normally take much notice of the wifes equipment :shock: I don't know if it was Tesco own brand or a proprietary brand :(

Scooby

Post by Scooby » Sun Jan 07, 2007 5:56 pm

Although Lock & lock are good for 130c they only recommend reheating and not cooking in them.

They have a silicon rubber seal and as DaaB noticed they are slightly more expensive for good reason.

Frothy

Post by Frothy » Mon Jan 08, 2007 1:06 pm

ok thanks I'm off to scour the supermarkets.

Matt

Vossy1

Post by Vossy1 » Mon Jan 08, 2007 9:18 pm

A little bit of cross over here with the plate chiller thread but they're related issues...kind of.

Would using a hop back negate the use of a filter when using a cfc, ie, would the hops in the hop back act as a pre filter :wink:

I think they might but I'll use a filter JIC to start.

Scooby/anybody,

What sort of quantity of hops do you use in your hop back ?

Scooby

Post by Scooby » Mon Jan 08, 2007 11:50 pm

I used 10g in my first brew as that was the end of a pack, and 15g in the second Vossy, that is what I would dry hop with, both were superior to dry hoping in terms of aroma, and of course flavour. Its early days but I guees you could use 20-25g

Both times it was Goldings 5.5 alpha yet to try different hops.

The manifold I use is 22mm with 3mm holes the same as the manifold in the boiler, the wort passes through a fine sieve after the CFC to aerate and catch hop bits etc, there are always a few seeds in there, (I presume that is what you want to filter)

The hops will act as a filter but not a FINE filter.

Vossy, when I got my L & L container I saw a ss tea strainer that was almost the same dia and fine enough to work a treat.

Vossy1

Post by Vossy1 » Mon Jan 08, 2007 11:53 pm

Thanks scooby :wink:

At least the tea strainer can be re-used 8)

Vossy1

Post by Vossy1 » Tue Jan 09, 2007 10:10 am

since they invented them new fangled tea bags eh V?
:D :D

I must admit to occaisionally re-using the bags as well :oops:

Post Reply