curiosity killed the beer?
curiosity killed the beer?
ok i mite have had one or two peeks in the fermenting bin to see how things or going and was just wondering if this could impair the fermentation process?does it have to be strictly kept shut?it seemed to be on a go slow i worry that i didnt aerate the wort enough
about 3 days!i was following bad insttructions that didnt mentioning activating the yeast so about 2 hours ago i made up some new yeast and put that in (being careful not to aerate the beer of course). something was happening but not very much at all so im guessing a lot of the original glucose is still available for the new yeast. what do you think?
Have you got a hydrometer to take a gravity reading? That's the only reliable measure that anything's going on. If you haven't seen any action at all though...
I suppose it could have been a bad yeast, or the wort could have been too hot/cold when you pitched it. You should find out soon anyway, now you've pitched a fresh yeast. Don't worry about aerating the wort at this stage, if fermentation hasn't started it needs the oxygen.
For what it's worth, I never rehydrate yeast, I always pitch it dry without any problems... (says touching wood...)
I suppose it could have been a bad yeast, or the wort could have been too hot/cold when you pitched it. You should find out soon anyway, now you've pitched a fresh yeast. Don't worry about aerating the wort at this stage, if fermentation hasn't started it needs the oxygen.
For what it's worth, I never rehydrate yeast, I always pitch it dry without any problems... (says touching wood...)
ok well not even 3 hours since the new yeast went in and its bubbling away nicely so i think im on my way to a decent first brew!have i got this right if i get two stable sg readings 24 hours apart then its ready to be transferred to the barrel?and another question ( come on im new) ive acquired a barrel from my late grandad seems to be well looked after but whats the deal with the top, it seems to have a valve or something will this automatically release pressure when it builds up inside?cheers
Yes, it will have a relief valve on the top, or a brass combined relief/injector valve.
I always look for three days with the same reading as a minimum, but it's a good idea to leave it a little longer to let some of the solids settle out a bit.
If it's your first brew, you'll be in a hurry - so don't worry about that bit!
I always look for three days with the same reading as a minimum, but it's a good idea to leave it a little longer to let some of the solids settle out a bit.
If it's your first brew, you'll be in a hurry - so don't worry about that bit!

Good luck with the brewing!
There's lots of information on this forum, and a lot of knowledgable brewers who are happy to help. Its's not unusual for beginners to be disappointed with their first brews and jack it in - it's definitely worth reading up and persevering though...
I was brewing at your age, I only returned to it recently after a long lay off. Rather than sad, I would think that you may become quite a popular chappy with your mates if you can turn out some decent beer...andrewdevlin86 wrote:by the way does brewing beer at 20 sound a bit sad?

There's lots of information on this forum, and a lot of knowledgable brewers who are happy to help. Its's not unusual for beginners to be disappointed with their first brews and jack it in - it's definitely worth reading up and persevering though...

Not sad at all. It's a hobby, it's interesting, you're in control of it, and it can get you and your mates pissed on great tasting beer! It's sure better coming back from the pub to draft beer at home for peanuts, than with a £40 box of warm Budweiser!
It sounds like the first yeast may not have fired (for whatever reason - 3 days with no visible activity is too long), the second pitch needs time to be assessed. If you're anything like I was you haven't missed anything in that fermentor (as it's your first baby!) the second yeast needs time 3-24 hours to start to show a foamy top from my experience.
It sounds like the first yeast may not have fired (for whatever reason - 3 days with no visible activity is too long), the second pitch needs time to be assessed. If you're anything like I was you haven't missed anything in that fermentor (as it's your first baby!) the second yeast needs time 3-24 hours to start to show a foamy top from my experience.
I quite like a couple of peeks as it goes along!
Oh aye - think my first brew was around 19... well... other than the turbo monstrosities of my early teens onwards
Only got back into it as my mate was extolling the virtues of Coopers Kits downunder so thought it was worth a stab again. First efforts were a 50/50 hit rate but this lot on here - they bully you into going to the dark side. Just you wait, it will be sacks of grain, hops, boilers and lost days before you know it!
(BTW - now 32)
Oh aye - think my first brew was around 19... well... other than the turbo monstrosities of my early teens onwards

(BTW - now 32)
19 here, been brewing a whole.... erm... 6 months?
something like that, and spent about £100 - 200 in total for my gear including kits to brew turbo cider to explode and soon some strawberry wine to erm... get people pished on 
brewing is very much cool, but i most likely will still buy the od case of lager from the shops especialy when i have nothing brewing and fancy getting wrecked 1 night
-matt


brewing is very much cool, but i most likely will still buy the od case of lager from the shops especialy when i have nothing brewing and fancy getting wrecked 1 night

-matt
check out the tap room thread andrew
viewtopic.php?t=7675
a lot of peope here started out at a young age
viewtopic.php?t=7675
a lot of peope here started out at a young age