The place to discuss all things about brewing hygiene!
-
tribs
Post
by tribs » Wed Dec 12, 2007 5:51 pm
Can anyone tell me if the H&G 10mm Beer line brush works well with a cornie pickup tube?
Cheers
tribs
-
tribs
Post
by tribs » Wed Dec 12, 2007 6:22 pm
Hi DaaB
I have been using oxyclean (baby) to clean my cornies but I'm a little suspicious I'm getting a small amount of residue from it. I am about to order from H&G and Antiformin was on the list, but I was thinking about using one of these to make sure I have no oxyclean residue. Do you reckon the Antiformin would shift it on its own?
Cheers
tribs
-
RabMaxwell
Post
by RabMaxwell » Wed Dec 12, 2007 6:47 pm
Hello Tribs one option is to use beer-line cleaner if you can get it i have used both Antiformin's & beer-line cleaner they have virtually the same make-up. I use beer-line cleaner for everything i used Antiformins for it rinses fairly easy just keep the contact time low with stainless same as you would with Antiformin's anyway.You should be abble to get about 5 litres for what Hop & Grape charges for 1 litre of Antiformin's
-
tribs
Post
by tribs » Wed Dec 12, 2007 7:10 pm
Cheers guys
Rab - where's a good source of BLC? I've looked for it before and drew a blank
tribs
-
RabMaxwell
Post
by RabMaxwell » Wed Dec 12, 2007 7:36 pm
I get mine for £5 for 5 Litres from a local chemical firm but i think it is available at Macro & various cash & carry places there is probably lots of other places to
-
tribs
Post
by tribs » Wed Dec 12, 2007 7:37 pm
Cheers Rab
-
johnmac
- Under the Table
- Posts: 1357
- Joined: Fri Jan 27, 2006 6:00 pm
- Location: Shropshire
Post
by johnmac » Wed Dec 12, 2007 10:26 pm
Can anyone tell me if the H&G 10mm Beer line brush works well with a cornie pickup tube?
Yes, it fits, but I've never seen any visible muck on the brush, so it may not be neccessary
-
tribs
Post
by tribs » Wed Dec 19, 2007 12:03 am
I've managed to source some BLC that is in a powder form that you add to water. The instructions are all in Italian. It looks like it turns green when in contact with contaminants and changes to purple when the contaminants are removed.
I've found
this which includes instructions. Interesting stuff. Anyone used this before?
-
mixbrewery
- Drunk as a Skunk
- Posts: 831
- Joined: Mon May 21, 2007 7:48 pm
- Location: Hemel
-
Contact:
Post
by mixbrewery » Thu Dec 20, 2007 9:01 pm
Like Rab - i've seen it in Makro's for those that have a card!
It's not always available though.

-
TheBigEasy
Post
by TheBigEasy » Mon Dec 24, 2007 11:42 am