Sunshine Brew

Had a good one? Tell us about it here - and don't forget - we like pictures!
Scooby

Sunshine Brew

Post by Scooby » Thu Apr 10, 2008 12:28 am

It was such a lovely sunny day today I decided to brew Townes Sunshine,
Pale malt, Wheat malt and Bramling X

Getting the gear ready.

Image Image

I usually mash for 3hr at 68c but as this is fairly low gravity I'm going for 67c

Image Image

It's common knowledge that dog blankets have a very high R-value :lol:

Image

Little tun at the limit batch sparging and first runnings. (Ok I'll clean them before the next brew)

Image Image

Vigorous boil on both elements.

Image

The hops go in and a nice rolling boil on one.

Image Image

Cooling, Had probs with the hopback so doing without. (Mk IV in the planning stage)

Image Image

I use an 'Aeration' vessel as the FV is too tall to fit under the cooler :roll: Pitching US-05

Image Image

I set 21c until it's working then 18c

Image Image

Nice bit of break material in a sample.

Image

fivetide

Post by fivetide » Thu Apr 10, 2008 12:38 am

Great stuff. Really enjoyed the pics. Also looking forward to getting that same recipe book (it's in the post!)

Vossy1

Post by Vossy1 » Thu Apr 10, 2008 1:02 am

Gr8 pics S...a fine brew indeed 8) :wink:

fivetide

Post by fivetide » Thu Apr 10, 2008 10:29 am

DaaB (from Minibrew:
"The Affordable Conical by minibrew is designed for five gallon recipes. It holds a full 6.5 Gallons. The tank and stand is 32" tall and 12" wide. Included with the fermnenter is a 3/4 inch nickel plated bottom ball valve, stand, lid, air lock, and 1/2" nickel plated racking port valve. Also included is a 3/4 inch and 1/2 inch nipple for fastening the valves to the fermenter. The Model f6.5 fermenter does not have thermometer mounting thread."

I like these a lot.

MightyMouth

Post by MightyMouth » Thu Apr 10, 2008 10:34 am

Sounds like a cracking day, I wish I could see the photos but my employer blocks images from certain hosts :(. Ill have a proper look later when I get home.

subsub

Post by subsub » Thu Apr 10, 2008 12:07 pm

Great pics Scoob and a great recipe, I'll definately be brewing this one again :D

Scooby

Post by Scooby » Thu Apr 10, 2008 12:46 pm

DaaB wrote:Lovely clear pics Scooby, it was a cracking day yesterday, I see the extension is well under way, put on hold temporarily for the brew no doubt :D

How sturdy are the lids on those plastic conicals, are they comparable to a king keg lid for example ? (any any chance you might measure the overall height for me when you get a chance ? :whistle: :mrgreen: )
I'm waiting on the brickies :roll: all the blocks, bricks etc are here.

The lid is not rigid at all Daab, it's a floppy plastic cap that seals over a
ridge on the lip.

Image

The size is as fivetide stated. But as you know it's designed for 5 US gal brews. 6.5 gal is 24.6l and that would fill it to within 1" - 1 1/2" inches from the top.

I thought it wise to point out that brewing to fill a cornie is fine, but you may not have many bottles to hive away :wink:

BTW the volume below the racking valve is 0.75l
Last edited by Scooby on Thu Apr 10, 2008 12:51 pm, edited 1 time in total.

Scooby

Post by Scooby » Thu Apr 10, 2008 12:50 pm

subsub wrote:Great pics Scoob and a great recipe, I'll definately be brewing this one again :D
Thats good to hear, I've never tasted Sunshine before but like the brews that have Bramling x with other hops in them. I'm looking forward to tasting it :)

stevezx7r

Post by stevezx7r » Thu Apr 10, 2008 1:25 pm

Looks like a good brew day, and a pro look to your set up :)

fivetide

Post by fivetide » Thu Apr 10, 2008 2:37 pm

Why are conicals so appealing? I'm at the MiniBrew site lusting over £150 plastic buckets... (the 8 US gallon one is quite cool...) :)

Scooby

Post by Scooby » Thu Apr 10, 2008 3:42 pm

fivetide wrote:Why are conicals so appealing? I'm at the MiniBrew site lusting over £150 plastic buckets... (the 8 US gallon one is quite cool...) :)
I know all the reasons we can't but I do wish we could get the gear for that price over here :cry: even the small stuff, a male and female 1/2" quick connect for $5 :roll:

fivetide

Post by fivetide » Thu Apr 10, 2008 4:15 pm

I presume you shipped yours from them for about $80 on top of the fermenter price?

An 8.5 USg jobby comes out at something like $289 + $120, it's a lot of cash.

User avatar
Garth
Falling off the Barstool
Posts: 3565
Joined: Tue Aug 22, 2006 1:00 pm
Location: Durham

Post by Garth » Thu Apr 10, 2008 4:16 pm

looks like a good brewday Scoob,

and quality photos as usual, nice one

I've got this maturing in the cornie at the mo, it'll be getting cracked open in the next couple of weeks

Scooby

Post by Scooby » Thu Apr 10, 2008 5:05 pm

fivetide wrote:I presume you shipped yours from them for about $80 on top of the fermenter price?

An 8.5 USg jobby comes out at something like $289 + $120, it's a lot of cash.
No I got mine from Beertech in Dec 06 fivetide, the exchange rate was not so favourable then and there was little difference from the £180 at beertech, in fact iirc it was more expensive.

According to the web site shipping is $93 and $198 for the FV it would be £147 now.

I know people say it's very expensive for 'plastic' but I consider it money well spent and I have been very pleased with mine, it is very high quality not at all like the plastic vessels we have over here.

The main downside for most is the fact that it isn't shiny :lol:

fivetide

Post by fivetide » Thu Apr 10, 2008 7:17 pm

Not at all, I think it's a brilliant thing! I wish it were a gallon bigger, but other than than I'd love one.

Post Reply