Sheepy Bitter

Had a good one? Tell us about it here - and don't forget - we like pictures!
User avatar
Jim
Site Admin
Posts: 10312
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Sheepy Bitter

Post by Jim » Sun Jun 15, 2008 11:46 am

This one's named after the yeast, not the style. :wink:

4.5kg marris otter
250g crystal
250g torrefied wheat

40g Challenger (18 IBUs)
15g Progress (9 IBUs)

10g Goldings at the end of the boil.

For my water treatement I stuck a couple of teaspoons of gypsum and about 1/8 tspn of Epsom salts into 10 gal of filtered water. The last brew had calcium chloride in, but it turned out badly - a very harsh bitterness which I'm putting down to too many chlorides (the watergem filter is supposed to add chlorides as well, so maybe I ended up with too many!).

I only took a couple of photos today - they all look the same anyway! :lol:

I made the yeast starter up with cooled wort from 3/4 hour into the boil - within less than an hour it did this!

Image

Might as well have a pic of the run-off;

Image
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

User avatar
Jim
Site Admin
Posts: 10312
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Post by Jim » Sun Jun 15, 2008 12:35 pm

I'm worried about what'll happen when it gets a proper hold of the main batch. :shock:

I'm using 1/2 gal of this wort to propagate the yeast. I got 6 gallons (or thereabouts) at sg of 42 - that'll be around 75% efficiency (I haven't bothered to actually work it out, though).
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

roger the dog

Post by roger the dog » Sun Jun 15, 2008 12:46 pm

Looks like a tasty one Jim 8)

User avatar
spearmint-wino
CBA prizewinner 2007
Posts: 1039
Joined: Sat Mar 10, 2007 9:08 am
Location: Nunhead, Sarf Lahndun

Post by spearmint-wino » Sun Jun 15, 2008 1:09 pm

That's the type of yeast that goes through your pockets when your back's turned! Unruly!

Have a good brewday Jim 8)

drinking: ~ | conditioning: ~ | primary: ~ | Looks like I need to get brewing then...
Visit London Amateur Brewers online

User avatar
Jim
Site Admin
Posts: 10312
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Post by Jim » Sun Jun 15, 2008 2:45 pm

DaaB wrote:.......fwiw, next time you go for a filter, the Opella filter cartridges in B&Q take the same fittings but and are a straight forward granular activated charcaol filter. You can replenish the charcoal too for a fraction of the cost. I bought 1.8kg for £13 the other day, that's a lifetimes worth almost :lol:
Sounds like a good plan. 8)
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

User avatar
Jim
Site Admin
Posts: 10312
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Post by Jim » Mon Jun 16, 2008 4:29 pm

Arrrgghhh!!!

Image

At least it just leaked up through the little hole in the lid and lay on top. :roll:

I had a plastic sheet down on the floor just in case, though.
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

User avatar
Jim
Site Admin
Posts: 10312
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Post by Jim » Mon Jun 16, 2008 5:16 pm

DaaB wrote::lol: you gotta love a lively brewery yeast :lol:
But I though Yorkshire yeasts were supposed to be lazy! That's why they use Yorkshire stone squares, isn't it? :lol:
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

User avatar
Jim
Site Admin
Posts: 10312
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Post by Jim » Mon Jun 16, 2008 6:16 pm

All cleaned up now. Skimmed and roused (not that it needed it, but what the hell). SG is down to 28 already. :shock:
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

ashbyp

Post by ashbyp » Mon Jun 16, 2008 6:47 pm

cool piccies :lol: that's what happened when I used nottingham, although that was my fault as it i put the bucket in the utility room when it was 30 degress in there :?

sounds like you have it under control now though.

User avatar
Jim
Site Admin
Posts: 10312
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Post by Jim » Mon Jun 16, 2008 6:51 pm

DaaB wrote:Does the Black Sheep brewery rouse their yeast ?
They use the Yorkshire stone square principle - as the wort ferments, the yeast head rises through a hole above the lower wort chamber and is trapped in an upper chamber. Every 8 hrs or so they spray wort from the bottom chamber into the top chamber which washes the yeast back into the bottom chamber (that's roughly the idea, anyway).
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

ashbyp

Post by ashbyp » Mon Jun 16, 2008 7:01 pm

Jim wrote:
DaaB wrote:Does the Black Sheep brewery rouse their yeast ?
They use the Yorkshire stone square principle - as the wort ferments, the yeast head rises through a hole above the lower wort chamber and is trapped in an upper chamber. Every 8 hrs or so they spray wort from the bottom chamber into the top chamber which washes the yeast back into the bottom chamber (that's roughly the idea, anyway).
and I worry about a bit of oxidisation when bottling :shock:

User avatar
Jim
Site Admin
Posts: 10312
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Post by Jim » Mon Jun 16, 2008 8:05 pm

ashbyp wrote:
Jim wrote:
DaaB wrote:Does the Black Sheep brewery rouse their yeast ?
They use the Yorkshire stone square principle - as the wort ferments, the yeast head rises through a hole above the lower wort chamber and is trapped in an upper chamber. Every 8 hrs or so they spray wort from the bottom chamber into the top chamber which washes the yeast back into the bottom chamber (that's roughly the idea, anyway).
and I worry about a bit of oxidisation when bottling :shock:
Well to be fair, during primary fermentation a bit of oxygen is a positive advantage - the yeast cells gobble it up and it helps them reproduce. At the bottling stage you do want to keep the air out, because there probably won't be enough yeast to remove it all.
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

User avatar
Jim
Site Admin
Posts: 10312
Joined: Sun Aug 22, 2004 1:00 pm
Location: Washington, UK

Post by Jim » Mon Jun 16, 2008 8:25 pm

DaaB wrote:I was wondering if it would finish early if you didn't rouse it.
It probably would - this yeast is supposed to ferment so vigorously that it pushes itself out of the wort. :shock: Without some method of getting it back in there I reckon it would under-attentuate.
NURSE!! He's out of bed again!

JBK on Facebook
JBK on Twitter

Vossy1

Post by Vossy1 » Mon Jun 16, 2008 8:29 pm

Glad to see you had a good brew day Jim, even with the runaway yeast :lol:

User avatar
mixbrewery
Drunk as a Skunk
Posts: 831
Joined: Mon May 21, 2007 7:48 pm
Location: Hemel
Contact:

Post by mixbrewery » Tue Jun 17, 2008 12:03 am

Good brew day there Jim.
What else did you manage to get hold of during your recent Black Sheep visit?
Check out the beers we have for sale @ Mix Brewery

Post Reply