Hi all, Today is my 1st AG brew with my newly constructed brewery setup

(popped my AG Cherry) I am brewing the Gob Hoblin from (
http://www.barleybottom.com/menu/product/&ID=183), I thought I would post a few pics whilst the mash is on the go. I managed to hit 66.8 on the mash temprature which I was pleased with. I will continue to update this thread as the brewday progress's.
Update:
Just checked the mash temprature at half way and only lost 00.1 started at 66.8 and at half way was 66.7, so my coolbox mashtun has been a great success
2nd update:
Did the 1st batch sparge with no problems, but half way through sparge 2 the flow stopped and I had too stir the grist and then allow it to settle again. Stopped taking runnings at about 31L and checked the gravity and it was 1000

so I was panicking thinking I had sparge too much. But after the wort cooled for a while it read 1010. The boil is now on with the 1st addition of Fuggles.
3rd update:
Well thats it my 1st AG finished and it only took me 7 hours from start to finish including cleaning up

It was not as half as bad as I thought it was going to be

and I think the hardest part was the cleaning up at the end

Managed to collect bang on 23 litres in the FV and its now sleeping soundly in the spare room. I would like to say a
BIG THANKYOU to everyone who has helped me on my pursuit of my 1st AG Brew, I will keep you guys posted on how it turns out.
Malt
Hops
Strike water
Mash Temprature
Mash
Half way mash temprature
1st batch sparge
1st runnings
2nd batch sparge
Grain bed
Hydrometer reading
Boil
Cooling with the IC
Filling the FV
Trub
OG 1042
Cheers DC
