HELP... New to this game.
-
blakeysbar
HELP... New to this game.
Hello everybody. Ive just joined this forum and need some help please.. ive just bought a cornelius maxi 20 beer cooler complete with dispensing taps and and it also came with some pipes, but ive not got a clue about how to plumb it all in, to both the keg, co2 bottle etc. Its a 4 line out unit. I will probably replace all the connectors pipe work and i need to get the keg/barrel fittings too, but wouldn't have a clue where to get any of this stuff? Let alone getting it up and running?, so any help would be greatly appreciated. I live in north kent, so is there any shop or company around this area where i can buy the bits i need?. Many thanks guys.
-
Cazamodo
Re: HELP... New to this game.
I see no-one has attempted an answer yet ha!
Ok so what exactly do you have already. Basically you will need CO2 bottle, Regulator, Beer line, Keg full of beer hopefully, maxi chiller, fittings for it, then a tap to dispense, and beer line for the lot.
First it depends what type of keg you have. Im guessing corny, so you will have a gas in and beer out.
Basically you set it up as normal, but it runs through the chiller.
The CO2 will connect to the IN post on the corny, and the Beer out will connect to the maxi chiller.
If you mean you have a maxi 201 with 4 lines on the back, two of them will be cooling lines that come straight out the back. The other two will be the python cooling lines which come out in an elbow. One thing to remember connect the two lines coming out at an elbow before filling it and turning it on as they are pumped and it will empty the contents all over your floor.
The line coming straight out is the one you wat, one side should say in, the other out. You connect the beer out corny line to the IN post on chiller, then you connect the OUT post on chiller to the tap you are dispensing with...
I hope hat sort of makes sense.
Ok so what exactly do you have already. Basically you will need CO2 bottle, Regulator, Beer line, Keg full of beer hopefully, maxi chiller, fittings for it, then a tap to dispense, and beer line for the lot.
First it depends what type of keg you have. Im guessing corny, so you will have a gas in and beer out.
Basically you set it up as normal, but it runs through the chiller.
The CO2 will connect to the IN post on the corny, and the Beer out will connect to the maxi chiller.
If you mean you have a maxi 201 with 4 lines on the back, two of them will be cooling lines that come straight out the back. The other two will be the python cooling lines which come out in an elbow. One thing to remember connect the two lines coming out at an elbow before filling it and turning it on as they are pumped and it will empty the contents all over your floor.
The line coming straight out is the one you wat, one side should say in, the other out. You connect the beer out corny line to the IN post on chiller, then you connect the OUT post on chiller to the tap you are dispensing with...
I hope hat sort of makes sense.