Pump
- Kev888
- So far gone I'm on the way back again!
- Posts: 7701
- Joined: Fri Mar 19, 2010 6:22 pm
- Location: Derbyshire, UK
Re: Pump
The fact that you can easily remove the motor shaft and magnet makes it much more suitable for cleaning than the little-brown/solar-project pumps IMO. It seems to use the same principle, in that the magnetic shaft/rotor is flooded and hard-coupled to the impeller, but if the brushless motor can handle overload then it will have most advantages of a magnetically coupled type. Good stuff, and thanks for posting the picture, Eric.
Kev
- Eric
- Even further under the Table
- Posts: 2919
- Joined: Fri Mar 13, 2009 1:18 am
- Location: Sunderland.
Re: Pump
It's on in a few places at less that I paid. One such can be found via this link.naturals wrote:Which of the pumps is the one in your photos Eric?
Without patience, life becomes difficult and the sooner it's finished, the better.
- Eric
- Even further under the Table
- Posts: 2919
- Joined: Fri Mar 13, 2009 1:18 am
- Location: Sunderland.
Re: Pump
That's worrying, while all those identified in this thread are 12V and said to be food safe, it's hard to think the similar looking 24V ones will use different materials for parts in contact with any liquid. Are you willing to identify the original source of the information?naturals wrote:Just a heads up to anyone thinking of buying these 24V black pumps - they are *NOT* food safe. The seller had them incorrectly listed. The listing has now been amended. I'm waiting for confirmation on whether the 12V is safe to use.
So far both my black 12v pumps have pumped only water for temperature control, but I was considering using them for wort as the solar pumps regularly stick needing to be stripped and cleaned, although they prove satisfactory with water for mash and sparge.
Without patience, life becomes difficult and the sooner it's finished, the better.
- orlando
- So far gone I'm on the way back again!
- Posts: 7201
- Joined: Thu Nov 17, 2011 3:22 pm
- Location: North Norfolk: Nearest breweries All Day Brewery, Salle. Panther, Reepham. Yetman's, Holt
Re: Pump
Eric's link still claims food safe.
I am "The Little Red Brooster"
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
Fermenting:
Conditioning:
Drinking: Southwold Again,
Up Next: John Barleycorn (Barley Wine)
Planning: Winter drinking Beer
-
- Lost in an Alcoholic Haze
- Posts: 638
- Joined: Tue Jan 06, 2015 2:12 pm
Re: Pump
i got a march 815 pump cheap (well 2) , but after using it compared to the solar ones i had i'd definitely buy another if it breaks , even the new price is good value for money
-
- Piss Artist
- Posts: 128
- Joined: Fri Apr 22, 2016 9:56 pm
Pump
I found the bridgewater pumps clog very easily also the bolt heads ring very easily also. Brew builders td5 has impellers and is a good pump but I burnt mine out very easily from a 5 second run dry accident. I got fed up with 12v pumps and got a second hand chugger, it's a beast and a bit overkill for what I need.
Keg kingdom are stocking a mains power pump that looks very similar to the grainfather pumps. If I was in the market again I would get that one. It's 60 pound and is rated for boiling liquid
http://www.kegkingdom.co.uk/products/brew-pump-3000
Keg kingdom are stocking a mains power pump that looks very similar to the grainfather pumps. If I was in the market again I would get that one. It's 60 pound and is rated for boiling liquid
http://www.kegkingdom.co.uk/products/brew-pump-3000
Re: Pump
I e-mailed a few of the eBay sellers who pretty much all said it was non-food safe. I then messaged the user 'xcellentglob' which is the eBay username for Welsky Technologies Limited. I'm not 100% but these guys seem to be the same as XCSource who seem to be the manufacturer of the unit. They are apparently going to update the title to say it's not food safe (note in the description it doesn't mention food safe, only in the title).Eric wrote:naturals wrote:That's worrying, while all those identified in this thread are 12V and said to be food safe, it's hard to think the similar looking 24V ones will use different materials for parts in contact with any liquid. Are you willing to identify the original source of the information?
This could of course be a case of someone in a Chinese office not having a great grasp of English and it may be fine after all. If anyone has one of these pumps would they mind digging out the manual and having a look to see if it states food safe or has some sort of CE mark which would confirm it once and for all?
Last edited by naturals on Mon Dec 12, 2016 10:54 am, edited 1 time in total.
- Eric
- Even further under the Table
- Posts: 2919
- Joined: Fri Mar 13, 2009 1:18 am
- Location: Sunderland.
Re: Pump
In fact, both of mine were from that source. I've just asked the question at present and will decide what might be done later.naturals wrote:Just noticed Eric - looks like you got one from xcellentglob - perhaps drop them an email and say they've told others it isn't food safe and that you want confirmation / money back if it's not safe? I'm happy to forward you my correspondence with them if it helps.
Without patience, life becomes difficult and the sooner it's finished, the better.
- Eric
- Even further under the Table
- Posts: 2919
- Joined: Fri Mar 13, 2009 1:18 am
- Location: Sunderland.
Re: Pump
Reply eceived earlier this morning......
Dear Eric,
Warm greetings from Welsky Technologies - and thank you very much for ordering from us.
We suggest do not use the item for food.
With best regards,
Welsky Technology Limited.
WELSKY TECHNOLOGY (UK) LIMITED, Company number 09258161, has its registered office in Bristol. It has 2 directors, each with one share of value 1 GBP, both of Chinese nationality.
https://beta.companieshouse.gov.uk/company/09258161
Dear Eric,
Warm greetings from Welsky Technologies - and thank you very much for ordering from us.
We suggest do not use the item for food.
With best regards,
Welsky Technology Limited.
WELSKY TECHNOLOGY (UK) LIMITED, Company number 09258161, has its registered office in Bristol. It has 2 directors, each with one share of value 1 GBP, both of Chinese nationality.
https://beta.companieshouse.gov.uk/company/09258161
Without patience, life becomes difficult and the sooner it's finished, the better.
- Eric
- Even further under the Table
- Posts: 2919
- Joined: Fri Mar 13, 2009 1:18 am
- Location: Sunderland.
Re: Pump
I use those pumps, but although fine with pure water hot or cold, find they don't perform as well with wort and need regular stripping else they will not always start.naturals wrote:I guess that confirms it then. It's a shame the listing here still states 'food grade' - I did email them around a week ago and they said they'd change the listing.
Back to Plan B for me then I guess - one of the little brown / beige solar jobbies.
Without patience, life becomes difficult and the sooner it's finished, the better.