Braumeister fermenting lid
Re: Braumeister fermenting lid
Speidel just confirmed for 2021 model.
I am going to modify the clamp so it fits my 2015.
Could have returned but that would have been more hassle .
I am going to modify the clamp so it fits my 2015.
Could have returned but that would have been more hassle .
Falling apart together nicley🍻
Re: Braumeister fermenting lid
Yeah I know that feeling.
Is it a big difference?
Does the lid fit?
Is it a big difference?
Does the lid fit?
Re: Braumeister fermenting lid
Hi Mashbag
The internal diameter is the same.The diameter of the lip on a 2015 is bigger than a 2021.
I will modify the clamp to get the diameter I need.
Will make an ideal clamp for my still conversion as well.
The Braumeister site is not clear al all to its fitment of older models.
There response was fairly dismissive as well.(they are going to get a tonking in the football next week )
The internal diameter is the same.The diameter of the lip on a 2015 is bigger than a 2021.
I will modify the clamp to get the diameter I need.
Will make an ideal clamp for my still conversion as well.
The Braumeister site is not clear al all to its fitment of older models.
There response was fairly dismissive as well.(they are going to get a tonking in the football next week )
Falling apart together nicley🍻
Re: Braumeister fermenting lid
Gotcha.
I did wonder if it would be easy to make one of these with spring clips on the lid, that over centre on the lip. (think octopus legs)
Laser cut stainless is cheap as chips.
I did wonder if it would be easy to make one of these with spring clips on the lid, that over centre on the lip. (think octopus legs)
Laser cut stainless is cheap as chips.
Re: Braumeister fermenting lid
Did you modify it to fit?
I ask, cos my findings are very pleasing. Just sampled the beer and it is spot on!
Wondered if you had a brew underway?
The process is so much easier. The cleaning is easier.... And get this.. After secondary fermentation the beer cleared REALLY quickly and really well.
I will certainly be doing a few more recipes this way. I think I now have the most idle "brewday" going.
Re: Braumeister fermenting lid
Hi Mash
Just back fro m a few weeks away.
Is there anyone out there with a BM20 plus model I need the dimension of the top lip.
So I can easily modify the clamp.
Good to here about your results.Look forward to trying this method out.
Just back fro m a few weeks away.
Is there anyone out there with a BM20 plus model I need the dimension of the top lip.
So I can easily modify the clamp.
Good to here about your results.Look forward to trying this method out.
Falling apart together nicley🍻
Re: Braumeister fermenting lid
Now all sorted with a modified clamp and a brew bubbling away nicely
Falling apart together nicley🍻
Re: Braumeister fermenting lid
Second brew with the Brew &ferment lid, This time with a blow off instead of a airlock.
bubbling away nicely.
First brew with this method is now being consumed ,turned out very nice.
bubbling away nicely.
First brew with this method is now being consumed ,turned out very nice.
- Attachments
-
- BandF2.jpg (783.5 KiB) Viewed 3924 times
Last edited by Nashbrew on Mon Sep 27, 2021 3:45 pm, edited 2 times in total.
Falling apart together nicley🍻
Re: Braumeister fermenting lid
I am really getting into this. Did you notice if the cleaning was easier and the brew seems cleareer?
BTW ..my brew (@25l) brew is nowhere near the top - why the blowoff?
BTW ..my brew (@25l) brew is nowhere near the top - why the blowoff?
Re: Braumeister fermenting lid
Cleaning was no bother after my last brew & ferment.
Just drinking now and is clear as anything.
I have always used an airlock or blow off. I know some brewerys ferment in open air.
Never really thought about it really , do you just leave the lid on yours?
Falling apart together nicley🍻
Re: Braumeister fermenting lid
Yes. I have put two bits a red insulation tape over the vents on the standard lid. That's it.
I wondered if you had foam blowing through the airlock and was intregued why?
I wondered if you had foam blowing through the airlock and was intregued why?
Re: Braumeister fermenting lid
Errm, that's fine, but the oxygen/co2 relationship doesn't really work like that.
Re: Braumeister fermenting lid
I once had a brew get oxidised in a secondry after the airlock water evaperated.
Falling apart together nicley🍻
Re: Braumeister fermenting lid
Blimey.