Another lid?

A forum to discuss one pot automated brewing systems.
Post Reply
User avatar
MashBag
Even further under the Table
Posts: 2147
Joined: Wed Oct 23, 2013 7:13 am

Another lid?

Post by MashBag » Thu Oct 13, 2022 7:31 am

I need another lid, for my BM20.
This will be number 3 😂
Internal diameter 35cm external 38cm.

Don't really fancy throwing money at Speidel, but it probably does need to be stainless.

Any ideas any one?

User avatar
Nashbrew
Piss Artist
Posts: 162
Joined: Thu Mar 04, 2021 4:21 pm
Location: The Shire UK

Re: Another lid?

Post by Nashbrew » Thu Oct 13, 2022 10:53 am

Hi Mash

I bought some lids from Aliexpress I may even have one in my shed.
Will take a look and drop you a line later.
They are not as thick as the original but will more than do the trick.
I used one for my still conversion.
If I don't have one here is a link comes in lots of sizes 38cm included
https://www.aliexpress.com/item/4000543738254.html
Or a domed one even https://www.aliexpress.com/item/1005004619890240.html
Falling apart together nicley🍻

User avatar
IPA
Under the Table
Posts: 1740
Joined: Wed Dec 07, 2011 9:29 am
Location: France Gascony

Re: Another lid?

Post by IPA » Thu Oct 13, 2022 12:58 pm

MashBag wrote:
Thu Oct 13, 2022 7:31 am
I need another lid, for my BM20.
This will be number 3 😂
Internal diameter 35cm external 38cm.

Don't really fancy throwing money at Speidel, but it probably does need to be stainless.

Any ideas any one?
What was wrong with the lids. ?
"You're not drunk if you can lie on the floor without holding on." Dean Martin

1. Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip

It's better to lose time with friends than to lose friends with time (Portuguese proverb)

Be who you are
Because those that mind don't matter
And those that matter don't mind

User avatar
MashBag
Even further under the Table
Posts: 2147
Joined: Wed Oct 23, 2013 7:13 am

Re: Another lid?

Post by MashBag » Fri Oct 14, 2022 12:04 am

Nash,

That would be great news.

IPA,
Nothing at all.
First is my standard & fermentation lid.
Second one is my boiling lid, which prevents boilovers.
This one (third) will be for my cooling device. To mount a coil on.


Nothing wrong

User avatar
IPA
Under the Table
Posts: 1740
Joined: Wed Dec 07, 2011 9:29 am
Location: France Gascony

Re: Another lid?

Post by IPA » Fri Oct 14, 2022 8:43 am

MashBag wrote:
Fri Oct 14, 2022 12:04 am
Nash,

That would be great news.

IPA,
Nothing at all.
First is my standard & fermentation lid.
Second one is my boiling lid, which prevents boilovers.
This one (third) will be for my cooling device. To mount a coil on.


Nothing wrong
Completely off topic but I noticed that your post is timed at 1204 am. On the twenty four hour clock system you can have 1204 pm or 0004 am but not 1204 am. I have noticed this on other forums.
"You're not drunk if you can lie on the floor without holding on." Dean Martin

1. Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip

It's better to lose time with friends than to lose friends with time (Portuguese proverb)

Be who you are
Because those that mind don't matter
And those that matter don't mind

zipfly
Steady Drinker
Posts: 51
Joined: Mon Nov 02, 2009 1:47 am

Re: Another lid?

Post by zipfly » Fri Oct 14, 2022 10:40 am

but if you have your settings as 12hr not 24hr then it can be 12-04 am

Sent from my VOG-L09 using Tapatalk


User avatar
MashBag
Even further under the Table
Posts: 2147
Joined: Wed Oct 23, 2013 7:13 am

Re: Another lid?

Post by MashBag » Fri Oct 14, 2022 12:37 pm

zipfly wrote:
Fri Oct 14, 2022 10:40 am
but if you have your settings as 12hr not 24hr then it can be 12-04 am

Sent from my VOG-L09 using Tapatalk
Yup. 12h clock am and pm applies. 24hr it does not.

User avatar
vacant
Even further under the Table
Posts: 2169
Joined: Mon Aug 20, 2007 5:39 pm

Re: Another lid?

Post by vacant » Fri Oct 14, 2022 7:33 pm

I use a custom date format

Code: Select all

g:i a \o\n l jS F Y

User avatar
MashBag
Even further under the Table
Posts: 2147
Joined: Wed Oct 23, 2013 7:13 am

Re: Another lid?

Post by MashBag » Fri Oct 14, 2022 7:34 pm

In what?

User avatar
vacant
Even further under the Table
Posts: 2169
Joined: Mon Aug 20, 2007 5:39 pm

Re: Another lid?

Post by vacant » Fri Oct 14, 2022 7:37 pm

Jims!

(control panel -> board prefs -> global settings -> my date format)

User avatar
MashBag
Even further under the Table
Posts: 2147
Joined: Wed Oct 23, 2013 7:13 am

Re: Another lid?

Post by MashBag » Sat Oct 15, 2022 5:30 am

Didn't really pay attention to that as a user.

Now set similar but 24hr. l jS F Y g:i

WalesAles
Falling off the Barstool
Posts: 3899
Joined: Thu Jan 24, 2013 11:07 pm
Location: South Wales UK.

Re: Another lid?

Post by WalesAles » Sat Oct 15, 2022 6:20 pm

Still got a sundial over here.
It don`t work much in Sunny Wales #-o

WA

User avatar
vacant
Even further under the Table
Posts: 2169
Joined: Mon Aug 20, 2007 5:39 pm

Re: Another lid?

Post by vacant » Sat Oct 15, 2022 7:13 pm

Maybe I'll set the time format to "B" and see how I get on with that.

User avatar
MashBag
Even further under the Table
Posts: 2147
Joined: Wed Oct 23, 2013 7:13 am

Re: Another lid?

Post by MashBag » Sun Oct 16, 2022 7:38 am

Nooo. Biel Mean Time is a futile exercise imo. I don't quite know why coders got so excited about it at the time.

Post Reply