Herms help for 100 ltr setup

A forum for those who boldy recirculate where no man has. .... you know the rest
Post Reply
User avatar
Piss Artist
Posts: 283
Joined: Mon Apr 29, 2013 5:05 pm

Herms help for 100 ltr setup

Post by Coffeeuk » Thu Aug 27, 2015 1:26 pm


I've just acquired a 100 litre shiny setup from a user on here.

I've decided to add a herm system to it as I like the benefits to clarity and consistency I get from it.

My dilemma is this.

Do I put the coil in the 100 ltr HLT which takes a while to heat up as it's only got a single 2.4 kW element. Or do I use a 30 ltr buffalo boiler I have spare which heats up a lot quicker and use that as a dedicated heat exchanger.

Any advise greatly appreciated



User avatar
Piss Artist
Posts: 139
Joined: Thu May 29, 2014 12:57 pm
Location: Chester

Re: Herms help for 100 ltr setup

Post by DethApostle » Thu Aug 27, 2015 4:56 pm

As I understand it 30l is pretty big for a HERMs boiler! I use 40l buffalo's at the moment for my HLT and copper and they don't heat up that quickly!

Demon Valley Brewing
2012 - 2020
Total Brewed: 2560 pints

Telling imaginary friend stories
Posts: 5229
Joined: Sun Oct 16, 2011 1:49 pm
Location: Cowley, Oxford

Re: Herms help for 100 ltr setup

Post by Fil » Wed Dec 16, 2015 8:53 pm

imho you will get a much better control using a kettle element in a small saucepan circa 6-8 pints max.

the lag using a 30l+ pot of liquor would be a significant factor.

using copper tube for the hex coil you will only need a couple of meters max,

If clarity is the goal, have you considered simply using a pump to vourlaff (jug back- i cant spell it ..) just plumb up and recirculate the mash before the drain/sparge till it runs clear and you can start to collect it..

which ever way you go have fun,
ist update for months n months..
Fermnting: not a lot..
Conditioning: nowt
Maturing: Challenger smash, and a kit lager
Drinking: dry one minikeg left in the store
Coming Soon Lots planned for the near future nowt for the immediate :(

Bridgewater Brewer

Re: Herms help for 100 ltr setup

Post by Bridgewater Brewer » Fri Jan 29, 2016 9:23 pm

I agree, the response time of a big boiler will be too slow. The best heat ex I made was in a 3.5 industrial kettle , kettles are good because they have built in safety switch

Recirculated through HLT is viable if you want to stop temp drop but lots of insulation is much better


Post Reply